GodHand Blade One Nipper 4.0 Made In Japan # GH-PN-120
GodHand make the best modelling tools in the world.
・Material:
Nipper: Carbon steel
Cap: Synthetic leather
Nipper for cutting plastic
● Cutting ability
・ Corresponding material: Only plastic (PS resin, PP resin, ABS resin, PE resin) can be cut.
-Cut capacity: Only compatible materials with a diameter of 3 mm or less can be cut. However, since transparent / translucent PS resin is hard, it is limited to Φ2mm or less. - Since delicate nippers with an emphasis on sharpness, There are to be or broken missing blade Misuse because it cut even-weak force, please do not incorporated grip with a strong force than necessary to-tip The blade becomes thinner and easier to break as you go, so cut as close to the center of the blade as possible. ・ Do not twist the blade during cutting or when removing the blade from the runner after cutting. If you twist it, a load will be applied and the blade will break. ・ Do not cut anything that does not fit in the length of the blade. A load is applied to one point in the middle of the blade, and it breaks or bends. ・ Do not use for cutting plastics with a thickness exceeding the cutting capacity or unsupported materials (metal, resin, paper, etc ...) de Please , plastic board cut, cut the tag, cutting of parts, applications, please do not use, such as a dowel cut in-use and after use, remove the chips, which were attached to the blade or the like toothbrush (blade brush) or prize. Cutting with chips remaining on the blade will overload the blade and cause damage.